Ekran 2.13 inča, za Raspberry Pi (e-ink displej 2.13”), 250 × 122, hat

1,899.00 RSD (Sa PDV-om)

5 na zalihama

Šifra proizvoda: w12915 Kategorija: Oznaka: Težina proizvoda: 27 g

Opis

SKU: 12915
Part Number: 2.13inch e-Paper HAT
Brand: Waveshare

 

 

250×122, 2.13inch E-Ink Display HAT For Raspberry Pi, SPI Interface
2.13″ E-Paper HAT

Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect

Ideal for price tags, shelf labels, industrial instruments…

    • Size2.13″
    • Resolution250×122
    • Viewing Angle>170°
    • Display ColorBlack and White
    • Grey Scale2
  • CommunicationSPI
  • Display PanelE-paper
  • ExperiencePaper-like
  • EnvironmentAmbient Light Required
  • Display TypePassively Reflective
  • RefreshingPartial Refresh Support
Features At A Glance
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
OPERATING VOLTAGE 3.3V/5V GREY SCALE 2
INTERFACE 3-wire SPI, 4-wire SPI PARTIAL REFRESH TIME 0.3s
OUTLINE DIMENSIONS 65 × 30.2mm FULL REFRESH TIME 2s
DISPLAY SIZE 48.55 × 23.71mm REFRESH POWER 26.4mW (typ.)
DOT PITCH 0.194 × 0.194mm STANDBY CURRENT <0.01uA (almost none)
RESOLUTION 250 × 122 pixels VIEWING ANGLE >170°
DISPLAY COLOR black, white
Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

for reference only, the Raspberry Pi in the picture is NOT included
Onboard SPI Control Interface

For Use With Other Controller Boards Like STM32/Arduino

VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data / Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output (high for busy)
Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags…

Outline Dimensions

Product Certification

Resources & Services

PACKAGE CONTENT

Weight: 0.014 kg

  1. 2.13inch e-Paper HAT x1
  2. RPi screws pack (2pcs) x1
  3. PH2.0 20cm 8Pin x1
1
2
3

Dodatne informacije

Težina 27 g

Deklaracija

Šifra: w12915
Naziv: Ekran 2.13 inča, za Raspberry Pi (e-ink displej 2.13”), 250 × 122, hat
Vrsta: Waveshare
Zemlja porekla: Kina
Zemlja uvoza: Kina
Uvoznik: MALINA 314 doo, Beograd
Telefon: 061-640-2013

Recenzije

Još nema komentara.

Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.